Products

The 406 ELT top mount cover protects the top of your C406 series ELT. It is a direct replacement cover for worn or damaged units. Top Cover Features Replacement top...

The ELT 345 (EDMO # 8100) includes the beacon and a 6‑year lithium battery. It transmits on 406 MHz and 121.5 MHz and provides optional GPS‑based position encoding. Installation hardware...

The Artex 110‑320 antenna provides tri‑band reception/transmission on 121.5, 243 and 406 MHz with dual inputs. Its glass‑reinforced polyester housing offers durability, and there is 10 dB of isolation between...

The Artex 110‑329 whip antenna is a single‑band antenna for ELT 110‑406. It transmits on 406 MHz and features a nickel finish. 110‑329 Antenna Features Whip‑type antenna for Artex ELT...

The Artex 110‑333 is a tri‑band blade‑type antenna designed to operate on 121.5, 243 and 406 MHz. It features a dual‑connector installation type and comes in white to match many...

The Artex 110‑418 whip antenna is a flexible ¼‑wave replacement antenna for the Artex ELT Test Set. It provides proper impedance and signal strength for test bench applications. Whip Antenna...

The Artex 110‑773 dual‑band whip antenna is designed for the ME406 series ELTs. This portable antenna provides transmission on 121.5 MHz and 406 MHz, offering a lightweight solution for installations...

This RJ‑11 flat cable is a 6‑pin, 4‑conductor crossed cable (18 inches long) used with Artex 406 ELT installations. It is compatible with ACK or Ameri‑King systems. Flat Cable Features...

The Artex 8104 ELT test fixture is a specialised bench tool used to measure current draw from an ELT 345 beacon. It allows technicians to verify that the ELT’s power...

The Artex C406‑1 ELT system is an automatic fixed beacon for fixed‑wing aircraft. It transmits on 121.5, 243.0 and 406 MHz; during a crash it automatically broadcasts analog swept tones...

The blank programming adapter (EDMO # 453‑5068) allows technicians to overwrite stored data on C406‑N ELTs. This unprogrammed adapter is used for fleet maintenance when reprogramming Cospas‑Sarsat protocols. Programming Adapter...

This ELT system packages the C406 N HM beacon with a rod antenna and remote switch. It transmits on 121.5, 243.0 and 406 MHz; includes a multi‑axis G‑switch for automatic...

The Artex C406 N HM ELT is an automatic fixed‑type emergency locator transmitter for helicopter applications. It transmits on 121.5, 243 and 406 MHz and automatically activates in a crash,...

This installation kit includes mounting hardware, wiring and connectors for installing an Artex C406‑N ELT. Using the proper kit simplifies installation and ensures TSO compliance. C406‑N Installation Kit Features Complete...

The Artex ELT 1000 kit is a value‑priced upgrade to obsolete 121.5 MHz ELTs. Its single‑output transmitter sends both 406 MHz and 121.5 MHz distress signals through one coax cable,...

The ELT 1000 emergency locator transmitter kit (EDMO # 8207) packages a 406 MHz/121.5 MHz beacon with a rod antenna, two‑wire remote switch, buzzer, mounting tray, coax cable and installation...

The ELT 1000 mounting strap and tray provide proper mounting hardware for the Artex ELT 1000. This kit includes a tray and securing strap. Mounting Strap & Tray Features Mounting...

The slim‑line 2‑wire remote switch is ideal for upgrading older phone‑cord ELT switches. It requires no modification to the panel cut‑out when replacing legacy switches, operates without batteries and can...

The Artex ELT 345 Compact Kit (EDMO # 8107) is similar to the standard kit but includes a shorter 15‑inch whip antenna and the standard 2‑wire remote switch. It transmits...

This replacement mounting bracket for the Artex ELT 345 includes the tray and strap. It provides secure installation and is ideal for replacing damaged brackets. ELT 345 Bracket Features Replacement...

The Artex ELT 345 Slim Kit packages a 406/121.5 MHz beacon with a 15‑inch whip antenna and slim‑line two‑wire remote switch. The ELT 345 transmits position‑encoded 406 MHz messages with...

The Artex ELT 345 Standard Kit (EDMO # 8102) combines a 406/121.5 MHz beacon with a 23.4‑inch whip antenna, standard 2‑wire remote switch, 6‑year lithium battery, buzzer, mounting tray, coax...

This mounting cap assembly is a replacement cap for the Artex ELT 4000. Made from high‑impact, fire‑resistant polycarbonate‑polyester plastic, it secures the beacon within its tray. ELT 4000 Cap Features...

This mounting tray is specifically designed for the Artex ELT 4000. Made from high‑impact, fire‑resistant polycarbonate‑polyester plastic, it provides a durable base that meets TSO requirements. ELT 4000 Tray Features...

These female pin contacts are designed to mate with male pins in Artex 406 MHz ELT connectors. They provide secure, corrosion‑resistant connections. Female Pin Features Female pins for Artex 406...

These male pin contacts are designed for Artex 406 MHz ELTs. They fit into corresponding connector housings and provide secure pin connections. Male Pin Features Male pin contacts for Artex...

This mounting frame cap is an orange cap assembly for the 406 series mounting tray. It protects the ELT and completes the tray assembly. Frame Cap Features Orange mounting frame...

This orange mounting tray is the bottom tray for Artex C406 series ELTs. It ensures correct positioning and provides a colour‑coded indication that it is part of the 406 series....

This ELT buzzer is used in Artex ELT 110‑406 and 110‑406HM systems. It provides an audible warning when the beacon is transmitting. Buzzer Features Replacement buzzer for Artex ELT 110‑406...

This Artex lithium battery pack provides five years of service life and is designed as a direct replacement for C406 and B406 ELT units. Keeping batteries current ensures your ELT...

The Artex C406N mounting cap covers the C406N ELT and secures it within its tray. It is a direct replacement part for damaged or missing caps. Mounting Cap Features Replacement...

This ELT NAV remote switch kit is the standard remote switch for TSO‑C91a and TSO‑C126 Artex ELTs (except ME406 ACE and B406 series). It allows remote activation of the beacon...

The FPT 8800 Field Programming Tablet provides a rugged, Microsoft‑Surface‑based platform for programming Artex ELTs. Delivered as a commercial aviation kit, it includes cables, adapters and software to program ELT...

This replacement battery pack for the G406‑4 ELT uses four D‑size lithium manganese dioxide cells connected in series. Diodes and fuses are built in to prevent charging and increase safety....

This self‑powered remote switch fits into the same cut‑out as the ACK remote switch and provides remote activation for the ME406 ACE ELT. A built‑in 5‑year lithium battery powers the...

The ME406 piezo buzzer provides an audible alert if the ME406 ELT is activated during a rough flight or landing. It is a field‑replaceable accessory that enhances situational awareness when...

This ME406 mounting tray holds your Artex ME406 ELT securely in the aircraft and includes a metal strap for fastening. It is designed to match the ME406 footprint and helps...

The ME406 install kit contains all hardware and wiring necessary to install an Artex ME406 ELT. ME406 Install Kit Features Dedicated installation kit for ME406 series ELTs Includes bracket, wiring...

The Artex 110‑775 portable antenna is designed for the ME406P ELT. It transmits on 121.5 and 406 MHz. This portable design is convenient for temporary installations or portable beacons. 110‑775...

The Artex 110‑324 whip antenna transmits on 121.5 and 243 MHz and features an inductor for performance at higher speeds. It is designed for aircraft speeds up to 200 knots...